...
| Panel |
|---|
| title | MESH_input_run_options.ini |
|---|
|
##### Control Flags #####
----#
1 # Number of control flags
RUNMODE default |
Options
Examples
| Note |
|---|
| Different options and processes may have different data and/or parameter requirements, even if in the same group. For now, refer to the notes and options in MESH_parameters_hydrology.ini (2.0) for the parameters required for WF_ROUTE and RTE... |
To run CLASS 3.6 with RTE:
| Panel |
|---|
| title | MESH_input_run_options.ini |
|---|
|
##### Control Flags #####
----#
1 # Number of control flags
RUNMODE runrte |
To run SVS with RTE:
| Panel |
|---|
| title | MESH_input_run_options.ini |
|---|
|
##### Control Flags #####
----#
1 # Number of control flags
RUNMODE runsvs runrte |
Options
Land Surface Scheme (LSS) and tile processes
Only one of these options should be specified. If multiple options from this group are specified, only the last will take effect. An option from this group can be paired with an option from another group.
| Option | Description |
|---|
| runsvs | Enable SVS; disable CLASS 3.6 |
| runclass | Enable CLASS 3.6; disable SVS |
| nolss | Disable CLASS 3.6 and SVS; disable 'tile' processes, reading in climate data, and writing basin water and energy balance output files |
Routing routine and grid processes
Only one of these options should be specified. If multiple options from this group are specified, only the last will take effect. An option from this group can be paired with an option from another group.
| Option | Description |
|---|
| runrte | Enable RTE; disable WF_ROUTE |
| noroute | Disable WF_ROUTE and RTE; disable 'grid' processes, channel routing, AUTOCALIBRATIONFLAG, and streamflow and reservoir output files |
Default and diagnostic configuration
These options override all other options. If both options are specified, only the first will take effect.
| Option | Description |
|---|
| default | Enable CLASS 3.6 and WF_ROUTE; disable SVS and RTE |
| diagnostic | Disable 'tile' and 'grid' processes; reading in climate data and writing output files remain active |